cuppednlocked
Ten Pointer
I bought a used Benelli M1 with a 24" barrel over a year ago. About that same time I won a free standard camo dip or an inshore charter for two. The gun was factory dipped but looked terrible so my choice was obvious.
After a long delay I finally got the gun to the hydro-dipper.
I asked for the pattern to run horizontally vs vertical and he did a great job.
It's exactly how I hoped it would turn out. In addition to the basic dip, I opted to add the bolt, a slug barrel w/fore-end, and steadygrip stock. I need to hit the trigger group with some rattle can black.
I should have my FF3 mounted tomorrow and taking it to pattern NLT Thursday if the weather holds.
After a long delay I finally got the gun to the hydro-dipper.
I asked for the pattern to run horizontally vs vertical and he did a great job.
It's exactly how I hoped it would turn out. In addition to the basic dip, I opted to add the bolt, a slug barrel w/fore-end, and steadygrip stock. I need to hit the trigger group with some rattle can black.
I should have my FF3 mounted tomorrow and taking it to pattern NLT Thursday if the weather holds.