22LR
Twelve Pointer
Got a stock 10/22, thinking about upgrading the accuracy. Trigger/barrel etc. Any tips or advice? Thanks
I didnt think you could reliably tweak a 10/22 trigger 1SHOT, wish id known that before i bought the kidd trigger grp
Sent from my iPhone using Tapatalk
The old aluminum housing ones were a cinch to do. The new polymer ones are a little different and require some shimming but can be done.I didnt think you could reliably tweak a 10/22 trigger 1SHOT, wish id known that before i bought the kidd trigger grp
Sent from my iPhone using Tapatalk
It is not difficult at all to get a factory stock down to 1.5 pounds. With a little more patience, stoning, and polishing you can get it down to a nice crisp 1 pound, if you know how.
Ever try the JB Weld trick?
<>< Fish
The old aluminum housing ones were a cinch to do. The new polymer ones are a little different and require some shimming but can be done.
No. I use a more permanent and old school trick that achieves the same results.
As you are aware the purpose of the JB Weld trick is to fill the gap between the top of the sear and the bottom of the disconnector, eliminating slop between the sear and the disconnector, thus eliminating the creep in the trigger.