Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Turkey cleaning

  1. #1
    Old Mossy Horns MJ74's Avatar
    Join Date
    Aug 2007
    Location
    Halifax,Co.
    Posts
    9,536

    Default Turkey cleaning

    I'm curious, after you kill a turkey how fast do you need to have it cleaned? I mean it's pretty warm some days this time of year and if you killed one in the morning can ya wait till that afternoon to clean it or will the meat go bad?

    Also what's the easiest way to clean a turkey?

  2. #2
    Floyd the Barber spoonriver's Avatar
    Join Date
    Aug 2007
    Location
    Mocksville
    Posts
    9,564

    Default

    Rem, I like to clean mine as quick as time will allow. I don't think I'd wait until the afternoon. If you did have to wait remove the intestines and put it in a cooler with an ice bag on top of it/ on the breast. I bought me a big pack of rubber gloves at the local auto parts store and in the past few years have worn a pair for deer, turkey or whatever.

    I generally eat the breast meat only. This method is used for removing the breast meat. I tried the meat off the drum sticks one time but found it rather tough. I've seen some great recipes on here though where some guys have used the drum stick meat in soups and stews.

    The way I clean mine is,,, Cut just above the vent hole to just above the big breast bone a couple of inches. The breast bone area is the small 50 cent piece sized area that looks to have no feathers on it, kind of a little bald spot. I try to make a straight up or down cut from the two points I mentioned. With a still warm bird you can work the skin away from the meat fairly easy with just your hands, the resistance is about like skinning a rabbit. If your not mounting it you can get more aggressive and tear some skin if you have too. Once I got the skin peeled back as far as I can with my hands I use the knife to do the rest. I then cut down through the meat on each side of the "dividing bone" or "ridge" that separates each breast piece. Be carefully and try not to puncture anything behind the breast meat. I just don't want my knife touching anything that could spoil the meat like guts or the crawl areas. Work each breast piece off slowly and try to get all the meat off as possible. I usually end up with two pieces of breast meat and two tenderloins this way. Most of the time I cut the meat up in small gibblets to fry for eating. When the meat is cleaned up before discarding the bird I take a peak inside the crawl just out of curiosity to see what its been eating. You'd be amazed some times. I don't keep the tail fans, spurs or beards anymore and end up chunking them, save them if you want to make something out of them though, several great post have been on here too for preserving them. I'm sure others will have some methods also but I hope I may have helped a little!

    Spoon
    Last edited by spoonriver; 04-22-2009 at 12:02 PM.

  3. #3
    Eight Pointer
    Join Date
    Aug 2007
    Location
    Ontario, Canada
    Posts
    1,120

    Default

    This is the way I clean all turkeys and usually am done in about 10 minutes.

    I fillet everything usable out. I save the wings for wingbone calls and save the legs as you can dry them in any ole configuration or cut the spurs off and add to your wingbone lanyard.
    So let’s get started. I use the smallest Rapala fillet knife and it must be SHARP!

    Turn bird on its back as seen in this picture below

    The first thing I do is remove he beard.

    First thing is to grab the beard and pull so you expose the skin as seen.

    Pulled out a bit further – don’t worry you won’t rip it off!

  4. #4
    Eight Pointer
    Join Date
    Aug 2007
    Location
    Ontario, Canada
    Posts
    1,120

    Default

    Now in the white exposed area feel with your fingers and you will feel where the base root of the beard stops – cut past there and don’t be worried if you take to much skin – You can trim it off later.
    This photo I started my cut…..

    Here it is totally off….

    Set it aside we will deal with it later.

    With the bird still on its back feel down the breast until you feel the soft part of the gut cavity. We will make a small cut there just through the skin – NOT into the gut cavity. This done right you will not expose guts.

    Next stick your fingers between the muscle an skin to open it up a bit and continue to expose the breast meat. If the skin starts to stick lightly use your fillet knife as if you are taking the skin off a fish. Again a sharp knife is a must!
    It will end up like this

    Next thing I do is remove the wings….I save those for wingbone calls. Even broke a bit there are bones still usable.

    Take off at the joint next to the body – If you want a traditional looking turkey take off at the second joint. Mine are taken off at the body.



    Next I take the feet off at the knuckle of the drumstick. Cut all the way around the leg through the back tendon and twist. The leg will pop right off – may take a bit of cutting to cut the remaining tendon. Set aside for now.

  5. #5
    Eight Pointer
    Join Date
    Aug 2007
    Location
    Ontario, Canada
    Posts
    1,120

    Default


    You have the breast exposed – Now take and peel back the skin on the legs until you have the bird looking like this. I save leg meat for soups, and sandwiches….and the Drumstick bone makes a very good 2 bone mouth call and a very nice pot striker!

  6. #6
    Eight Pointer
    Join Date
    Aug 2007
    Location
    Ontario, Canada
    Posts
    1,120

    Default

    Once you have the skin away the air sac is exposed.



    I trim carefully – and pull a bit to removed this like shown.

    Though a bit wet – my hands are not real messy!

    Now I start taking off one breast at a time.

    You can see the white line of the breast or keel bone. I cut going down along that keel bone and follow the wishbone in front and then trim back. I lift this flap of meat and cut forward along the rib cage using the fillet knife. Just like filleting around a fishes rib cage. I do this until I reach the wing joint and then cut the fillet free
    It will look like this

    After I have removed both sides of the breast I tackle the thighs.
    Take the legs and push flat – you hear a pop as the leg bone comes out of the socket.

  7. #7
    Eight Pointer
    Join Date
    Aug 2007
    Location
    Ontario, Canada
    Posts
    1,120

    Default

    Next start at the top and cut along the body. I f you are going to get any blood on you it is here as you cut the leg arteries. So be careful. Done right your hands are really clean.





    On the thigh and leg cut around the drumstick knuckle between he thigh and drum and you can bend it nicely to fit in a gallon plastic bag. I put all in plastic Zip-Loc bags and cool immediately. Once at home I do wash and trim any thin film of skin off and then freeze in a new bag.

    The wings can be boiled and all feathers taken off. I will post how to make wingbone calls later.

    The beard I place skin side down in a cup of Borax for about a month. I then add it to the shot shell casing I used to kill this bird.


    Hope this is helpfull

  8. #8
    Twelve Pointer Greg in Cary's Avatar
    Join Date
    Aug 2007
    Location
    Cary, NC
    Posts
    2,307

    Default

    Nice dobber. Excellent post. This needs to be made into a sticky I think.

    NRA Certified Instructor (Rifle, Pistol)

  9. #9
    Floyd the Barber spoonriver's Avatar
    Join Date
    Aug 2007
    Location
    Mocksville
    Posts
    9,564

    Default

    Quote Originally Posted by Greg in Cary View Post
    Nice dobber. Excellent post. This needs to be made into a sticky I think.
    Agree,,, dobber has the best info when it comes to cleaning animals. The deer one was great too.

  10. #10
    Pigskincoach
    Guest

    Default

    +3 what a great post...
    Last edited by Pigskincoach; 04-22-2009 at 05:16 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •